Xiaomi Mijia holder - Multiboard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
This is a holder for a wireless Xiaomi Mijia thermometer / hygrometer to mount it on your Multiboard wall.
Extra parts
You need a Snap to attach this to your Multiboard. I'd suggest to use a standard (flush) one:
Print settings
Print with usual Multiboard Settings which are a 0.4 mm nozzle, 3 perimeters wall thickness, 0.2 mm layer height, 15% infill and no supports.
Apart from that, use your printer's default settings.
Caveats
The Push-Fit connector is not my preferred solution, because they are often quite loose.
But because of the small size of the holder, I can not use point slots or rails. There is not enough space for two of them, so the holder could rotate along a single point. And a Peg Click would require extra support, which I try to avoid.