Futuristic Hypercar | 1:43 Scale, No AMS/MMU
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
![N* [Norkius]](https://media.printables.com/media/auth/avatars/e2/e24bfdfe-c28a-4f23-9e41-f931af3862f1.png)
It's a futuristic hypercar!
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 173
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A futuristic hypercar, wheels and tires print separately so you can customize your colors. It is approximately 1:43 scale, I do not suggest scaling down with a 0.40mm nozzle.
All parts should be push fit. If things are a bit too loose I would suggest a small dab of superglue. Rear wheels and tires are wider and unique from the front wheels and tires.
The body itself was generated by image to model from makerlab, but I spent a considerable amount of time removing the garbage wheels and tires, fixing or removing small details, replacing the wheels and tires with separate versions, testing dimensions, testing support settings and trying out different print orientations.
I hope you enjoy this model. If there is interest I may look at creating more like this.
Happy printing!