Futuristic Hypercar | 1:43 Scale, No AMS/MMU
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
![N* [Norkius]](https://media.printables.com/media/auth/avatars/e2/e24bfdfe-c28a-4f23-9e41-f931af3862f1.png)
It's a futuristic hypercar!
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 33
- Makes
- 0
- Views
- 173
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A futuristic hypercar, wheels and tires print separately so you can customize your colors. It is approximately 1:43 scale, I do not suggest scaling down with a 0.40mm nozzle.
All parts should be push fit. If things are a bit too loose I would suggest a small dab of superglue. Rear wheels and tires are wider and unique from the front wheels and tires.
The body itself was generated by image to model from makerlab, but I spent a considerable amount of time removing the garbage wheels and tires, fixing or removing small details, replacing the wheels and tires with separate versions, testing dimensions, testing support settings and trying out different print orientations.
I hope you enjoy this model. If there is interest I may look at creating more like this.
Happy printing!