Customizable Bubbler airlock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple "bubbler" style dual-chamber airlock for home brewing. Note: still having trouble with getting prints…
- Ocena
- 5 / 5
- Polubienia
- 34
- Pobrania
- 224
- Wydruki
- 3
- Wyświetlenia
- 1600
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
This is a simple "bubbler" style dual-chamber airlock for home brewing.
Note: still having trouble with getting prints to reliably hold liquid. I'm pretty sure it'll work if I print in PETG, but with PLA it's giving me trouble.
Update 2017-09-10: a new cider season is here so I've had a chance to do more testing and tweaking. Adjusted the model a bit for a "flatter" shape and tested with PETG. So far, natural PETG with 5 perimeters and 6 top layers at 50% infill seems to be holding up to primary fermentation pressures. YMMV.
Print Settings
Printer Brand:
RepRap
Printer:
Makerfarm i3v 8
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
50%
Notes:
Natural PLA. Use at least 5 perimeters, and print the airlock upside down with 5-6 top layers to ensure the bottom holds liquid.
Category: Kitchen & Dining