Liczymy pasujące modele…
DeWalt AirLock compatible twist-lock dust collector fitting I like DeWalt tools well enough and own a bunch, but like every other tool vendor their approach to dust collector connections is psychotic. I'm not at all convinced that any two…
The Airlock Dock & Stacker slide onto the lid of the PolyDryer™ Box and are held with a friction fit. The airlocks can be press fit into the dock and are also held in place with a friction fit. The Stacker version allows you to stack…
Adapter to connect FESTOOL™ CLEANTEC™ D27 Dust Extractor to DeWalt™ Air-Lock™ tools This adapter is designed to allow a FESTOOL dust collector with a D27 hose fitting to connect easily to DeWalt tools featuring the "AirLock" style dust…
Make your own DWV9470-XJ ! Print this, and then add your own hose and air-lock hose adapters . Print with the single port on the print bed, and the two arms of the “Y” facing up. Would be best to add brim for extra bed adhesion. Can be…
Reacently bought a second hand DeWalt vacuum and it never came with adapter for the airlock end to use the built in attatchments so I knocked up this, Figure someone could be in need also. Printed on my stock Ender 3v2 works a treat!
This adapter allows you to easily connect a 2.5" vacuum hose to Dewalt Airlock compatible tools. My primary design goal was to allow for quick one-handed connect & disconnect. To that end, this adapter simply pushes on and uses four…
Not much use on its own, but this can be added to your own design to allow the connection of a DeWalt airlock connector. This is basically half of a DWV9130-XJ , the mating part is the DWV9000-XJ . Please share your remixes, so I can see…
This is a simple "bubbler" style dual-chamber airlock for home brewing. Note: still having trouble with getting prints to reliably hold liquid. I'm pretty sure it'll work if I print in PETG, but with PLA it's giving me trouble. Update…
I remixed an Camlock adapter to fit all standard DeWalt AirLock connectors. I tested it on all machines I have on hand (noticed that tolerances on my machines differ, maybe you need to rescale the model by about 0,5 to 1 %). For the screw…
These lids screw on perfectly on Mason jars but require the use of silicone gaskets to be 100% airtight (available from Amazon). They have a threaded hole in the middle to screw in the threaded airlock stem. The tightness of the fit may…
Made to fit into the Dewalt airlock connection system for drilling diameters of up to 30mm, the item is made from PLA a brushed seal can be added that largely prevents leakage of dust. Dust seal - 6mm x 6mm# Infill - 15% - 25% Walls - 3…
A bottle cap designed to fit 5L (~55mm) PET water bottles, with a hole (11mm) to accept an airlock. I have seen other similar designs (particularly DennyNC's) but they are for a smaller mouth bottle and doesn't work after up-scaling to…
ABS/PETG Wall thick 1mm so that the printing process is faster but stronger. Diameter 10mm
Y-splitter for Dewalt airlock system
Adapter that fits some of Nilfisk's hoses. Used with @luma's Airlock model. Needs support.
Adapter for the Dewalt(TM) Airlock(TM) System to fit with the osVAC platform. Remix of original Thing ID 4512926. Fitting to the osVAC M32 connector 4671596 and therefore can be used with the complete osVAC setup. I printed it with PLA…
See videos for details. 01/31/2025: Updated the airlock with remote as I strengthened the remote bracket. The zip-tie hook was too weak. Now 1mm thicker.
An airlock for airlock things, I'm not sure how to print this but I thought I would upload it anyway
This is a connector for osVAC neo (osvacneo.de) (M25 or M32) to DeWalt™ AirLock™ compatible twist-lock machines. I used it for my DWE6420 Orbit Sander. Print Settings Printer Brand: ELEGOO Printer: ELEGOO NEPTUNE 3 Pro Rafts: No Supports:…
This is a vacuum hose adapter for DeWalt airlock systeem. On my DeWalt DWE315KT multitool it replaces the dwv9000-xj adaptor. Maybe it will fit also other DeWalt tools. It is for hose 32 mm. The diameter on the DeWalt adaptor on my…
The airlock adapter doesn't actually function as intended - it would not push down to the locking ring, but the fit is tight so it functions as an adapter just fine.
A replacement for the Dewalt airlock cleaning nozzles. I thought it was ridiculous that the official or off-brand part is £15 + so I redesigned my own. Top Layer - 2 Bottom Layer - 3 Walls - 3 Infill - 15% - 25%
Dewalt Airlock adapter Ø33,8 - 35,8 mm. Look at the picture for measurements. With FUSION 360 file. The disc on the end must be removed before use. Is only for stability during printing.
This is a screw on lid for a Speidel 12L HDPE fermenter that has a port for a Speidel airlock. I really like the Speidel fermenters, but I misplaced the single bung that came with it and needed something to replace it. Making a lid seemed…
Quick modification to the inner lock ring of svideo's great DeWalt AirLock compatible twist-lock fitting. You must print the other two components from the original Thing files. The original version is designed for certain models that have…
Useful as a model to design additional adapters. Flexible material required such as TPU95A.
A basic plug that fits to 5L bottles to keep your airlock.
This adapter works together with the Dewalt DWV9000 adapter in order to create a locked (but still rotatable!) connection between your Bosch AdvancedVac or UniversalVac vacuum cleaner and all of your Dewalt Airlock-compatible power tools.…
Used @DIYwithJJ's instructional video to combine @KajasX's dust port attachment for DeWalt DCW600 DCW604 with @PouOu's excellent DeWalt Airlock Adapter (male end). The male airlock end is the same dimensions as on my palm sander DCW210,…
This is a very simple Adapter from a female 1/4" BSP thread to an opening which can accept a common fermentation airlock tightly. I use this to connect a fermentation Airlock to my spunding valve via a Duotight-1/4 BSP adapter. This…
DeWalt AirLock Adapter 50 mm
Anpassung der Staubabsaugung für die Marita 3709 Fräse von adaptive76 mittels des Adapters von sstteevvee, um das DeWalt Airlock System anschließen zu können. Nicht schön, aber funktioniert
A simple way to rewind the filament spool, with out losing the airtight integrity of the 4L cereal container dry-box with this grommet, collar and cap. The roller has a slot in one end, and used modifiers to add a fuzzy skin to give more…
My Dewalt DW716 miter saw has a 1.5" OD dust port that I wanted to use with my vacuum having a Dewalt Airlock connector. I didn't want it to stick too far out of the back of the saw so I made this adapter as compact as possible. I…
I needed one airlock for my fermenter but I didn't receive the new airlock in time, so, I decided to print one to be able to brew one more beer! Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution:…
Adapter, um eine DeWalt Airlock Kupplung an ein DN50 HT Rohr anzuschließen. Für mehr Stabilität in ABS mit 6 wall loops, 6 top und bottom layers und 50% rectilinear infill.
Such a great original design I decided to modify it for multiboard. I am probably mounting my airlocks wrong but it works for me.
This is a replacement airlock cap for a standard S-airlock. Dimensions Outer width: 24 mm Inner width: 22 mm Height: 10 mm Inner height: 8 mm
Remixed the great design by svideo; this version has a 90 degree bend. The bottom is flat to allow for printing without supports. Category: Tools
This is a simple lid for 5-gallon jugs that has a hole allowing for an airlock. The hole is about 11.5mm in diameter, allowing for both the airlock stem and a rubber gasket to fit snugly.
Turn any standard mason jar into a bubbler for a quick and easy airlock for fermenters. To be used with 5/8 OD tubing. Printed with PLA at 0.3mm layer height. Cheers!
Adapter for a standard bubbler for a 5l mason jar from an unknown brand
I bought a round exhaust port for my makita handheld planner and made this adaptor to fit my dewalt dust suppressor. Makita exhaust port: 451329-1 (about 12$ on amazon) I used ABS for durability
Dewalt Airlock for a 32 mm hose. The hose connection is rotatable. The connection is mounted with a piece of filament that is pushed through the hole. The cap can also be secured with a piece of filament, but it stays in place even…
An adapter from DeWalt Airlock to nozzles of other brands, e.g. Nilfisk. Can be printed without support.
This is a functional remix of the original Airlock Dock Stacker designed for the Polydryer system. I modified the design to allow stacking two Polydryer boxes with the top unit flipped upside down , while keeping both units aligned and…
It fits three airlocks, the picture shows the one that fits great, with two holes to screw it into the wall.
This Adapter connects a DeWalt AirLock hose with the DeWalt Zyklon
I tried to find similar adapter but i saw that was really hard. In my opinion that should be one of the most critical adapters out there. I am a Dewalt and Milwaukee tool freak..i like to combine best tools from those two worlds. Please,…
This is a simple remix of https://www.thingiverse.com/thing:4512926 to combine the part that connects to my Dewalt 20v sander and the air hose from my Dewalt 20v shop vacuum. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts:…
This is an adapter for DeWalt Airlock vacuum nozzles. You can change the diameter in Fusion 360 via parameters.
Doporučení k tisku: PETG/PLA, 3 perimetry, 15-20% výplň. Při tisku užším koncem na podložce stačí podpěry pouze pro vnitřní malé konektory. Printing recommendations: PETG/PLA, 3 perimeters, 15-20% infill. When printing with the narrow end…
Single print without supports only requiring a PET bottle, the cap, and a capful of water. Depending on the type of threads, you may need a gasket. You can make it from hotglue. Print the short version to save on filament Print Settings…
I recently purchased a Polymaker PolyDryer filament dryer. Something tells me that I will eventually need a replacement Airlock in the future. A version without anti-slip pads is also available. Print instructions: Body: Material: PETG…
In Mission 3 müssen noch die Türen der Luftschleuse erneuert werden, da sie scheinbar der letzten Explosion nicht standgehalten haben (Knick) und auch geschrumpft sind. ----- English Version ----- In mission 3, the doors of the airlock…
This multiboard attachment holds three #7 bungs for airlocks typically used in home brewing. Can even just barely fit #6.5 bung. Print at .2mm layer height Print with flat side (top) down, some supports may be needed for multiboard pegs.
See video for complete information
Made so I could connect my DeWalt tools using the AirLock twist System with my old trusty Electrolux dust collector
Adapter fitting to convert Dewalt Airlock compatible socket (43mm) to 4 inch OD pipe. Useful for large pipe dust collectors. Flexible material required such as TPU95A.
This is a simple adapter that allows connecting the DeWalt airlock locking connector a Makita dbo180 orbital sander. I got best results printing this in fillamentum flexfill 98A which is a slightly flexible material that will take a bit…
Replaces the reverse-threaded connection with one with an end suitable for the DeWalt DXV08SA vacuum's hose.
See video for more details.
Printed on a Creality K1 SE using default settings with Hyper PLA Black 1.75mm
Updated 5/11/2023 Modified Cap.f3d with parametric parameters to adjust the dimensions of the USB-C cord. The USB-C cable constantly falls out of my Airlock Nanovac Vacuum Pump so I designed this cap to hold the cable in place. I included…
I've lost a couple of airlocks in my beer brewing cellar, so i made a placeholder for the airlocks i use for my fermzilla fermenters. It's neat and tidy and easy to print. I have'nt lost any airlocks after i started using this one. It…
So you bought one of those sweet Harbor Freight Hercules 12-Gallon dust collectors, and you realize that it doesn't connect easily to your Dewalt DCW210 random orbital sander with the Dewalt Airlock port. This adapter solves that problem.…
An organizer for the AirLock system, holds the bags, vacuum and sealing clips.
Gedruckt auf Bambu X1C mit 3 Wandstärken und 25% Infill
similar to the other one I designed with an important design change. Category: DIY
I use 1 liter jars for fermenting, and I needed a lid that would fit the rubber stopper on my airlocks. This lid fits the screw thread on a 1 kilogram Adam's peanut butter jar, found in groceries in Canada. The opening in the lid for the…
Dear All, an attempt to design a beer airlock system out of PLA or same. Best Regards Category: DIY
📅 16.06.2025 🇩🇪 Deutsch: 🧱 Stärke der Außenwand bearbeitet , weil doch etwas 💧 Wasser durchdiffundierte . 🇬🇧 English: 🧱 Adjusted the thickness of the outer wall because some 💧 water was still diffusing through . 🗓 Update 9.6.2025 🧂…
This is an adapter to use the Speidel fermentation airlock on a fermenter with a 1.5" triclamp spigot. The “cork” does not fit on these fittings and is too loose.
This is a simple adapter that allows connecting the DeWalt airlock locking connector a Makita grinder dust collector shroud. I recommend printing this in a flexible filament as the dust port on the tool is tapered and it needs a bit of…
Removed the logo, added hole for 6mm x 3mm magnet.
A small, low-material print designed to organise the sealing clips and the Airlock Nanovac unit, as I was tired of constantly taking out and putting the unit into the box it came with. It also makes the unit easily accessible for sealing…
A small block to organize the Plaato airlock after cleaning. Sized so they can be put against each other for multi airlocks. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2 Infill: 10%…
I wanted a way to display my filament type and color on my polydryer boxes while printing. I have identifying tags on all of my cereal dry boxes, so I modified the polydryer airlock to include a name tag holder This is not intended to be…
This CAMLOCK male adapter works on the DeWalt DWE6423-QS, and likely other tools with the DeWalt Airlock system. Instructions I printed it in PLA at 0.2mm. The holes are intended to drill out with a 2mm drill. To lock it into place, you…
What it is A one-piece, screw-on lid for wide-mouth (86 mm) mason jars . A hollow plunger reaches 2 in (50.8 mm) below the rim and presses on the outer edge of a standard 70 mm glass fermentation weight, so the weight can't float up and…
Use a standard fermentation airlock with a 64 fluid ounce growler. Spaces for two o-rings, just use whatever you have on hand, ideally around 20mmx2mm
Adaptér pro odsávání hoblin z frézy IGM PS33 pro vysavače DeWalt. Vnitřní průměr adaptéru je 61,5 mm. Adapter for extracting shavings/sawdust from the IGM PS33 router for DeWalt vacuum cleaners. The adapter’s inner diameter is 61.5 mm.
Disclaimer: Fermentation/Homebrewing can vary in legality from country to country. Check local laws before attempting to do so. Consume alcoholic beverages responsibly and only according to local laws. I will not be responsible for any…
Doporučení k tisku: PETG/PLA, 3 perimetry, 15-20% výplň. Při tisku užším koncem na podložce stačí podpěry pouze pro vnitřní malé konektory. Printing recommendations: PETG/PLA, 3 perimeters, 15-20% infill. When printing with the narrow end…
This is a simple lid for 5-gallon jugs that has a hole allowing for an airlock. The hole is about 11.5mm in diameter, allowing for both the airlock stem and a rubber gasket to fit snugly.
So you bought one of those sweet Harbor Freight Hercules 12-Gallon dust collectors, and you realize that it doesn't connect easily to your Dewalt DCW210 random orbital sander with the Dewalt Airlock port. This adapter solves that problem.…
These lids screw on perfectly on Mason jars but require the use of silicone gaskets to be 100% airtight (available from Amazon). They have a threaded hole in the middle to screw in the threaded airlock stem. The tightness of the fit may…
Replaces the reverse-threaded connection with one with an end suitable for the DeWalt DXV08SA vacuum's hose.
