1 / 3
Dewalt Airlock to DW716 Miter Saw 1.5" Dust Port Adapter — zdjęcie 1
1 / 3

Dewalt Airlock to DW716 Miter Saw 1.5" Dust Port Adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Dewalt DW716 miter saw 1.5" dust port adapter to connect a vacuum using a Dewalt Airlock quick-release.

Ocena
0 / 5
Polubienia
9
Pobrania
68
Wydruki
0
Wyświetlenia
753
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

My Dewalt DW716 miter saw has a 1.5" OD dust port that I wanted to use with my vacuum having a Dewalt Airlock connector. I didn't want it to stick too far out of the back of the saw so I made this adapter as compact as possible.

I recommend not printing with PLA because it can shrink in the heat. At least that was a concern for my garage workshop where it can get quite warm in the summer. I printed mine with PETG.

The longer end of the adapter goes on the saw. Mine fit tight enough that there was no risk of it coming loose after pressing and twisting it into place.

Tagi