osVAC neo M25/M32 to DeWalt AirLock compatible twist-lock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Connector for osVAC neo to DeWalt™ AirLock™ eg for DWE6420 Orbit Sander or different machines
- Ocena
- 4 / 5
- Polubienia
- 12
- Pobrania
- 118
- Wydruki
- 1
- Wyświetlenia
- 543
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a connector for osVAC neo (osvacneo.de) (M25 or M32) to DeWalt™ AirLock™ compatible twist-lock machines. I used it for my DWE6420 Orbit Sander.
Print Settings
Printer Brand:
ELEGOO
Printer:
ELEGOO NEPTUNE 3 Pro
Rafts:
No
Supports:
Yes:
Tree support shoud work for both parts
Maybe the body needs zigzag pattern instead, but this is hard to remove. See gcode of original design.
Use support blocker for the upper part of the body because M25/M32 does not need any support. See picture “cura settings”.
Resolution:
0.2
Infill:
50%
Filament: Geeetech PETG white
Post-Printing
remove supports; be careful
