1 / 4
Dewalt Airlock push-fit to 2.5 shop vacuum hose adapter — zdjęcie 1
1 / 4

Dewalt Airlock push-fit to 2.5 shop vacuum hose adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Adapter to connect a Dewalt Airlock tool to a 2.5 shop vacuum hose

Ocena
0 / 5
Polubienia
33
Pobrania
231
Wydruki
0
Wyświetlenia
1507
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Share Alike

This adapter allows you to easily connect a 2.5" vacuum hose to Dewalt Airlock compatible tools.

My primary design goal was to allow for quick one-handed connect & disconnect. To that end, this adapter simply pushes on and uses four spring-loaded tabs for retention. It connects with a satisfying click and stays on quite well. It also rotates freely which is useful to keep the hose from twisting.

This approach is not nearly as bombproof as twist-lock fitting such as this excellent design https://www.printables.com/model/104926-dewalttm-airlocktm-compatible-twist-lock-dust-coll - but for my use case it's plenty strong.

My secondary design goal was to make it as low profile as possible. I accomplished this by tapering the adapter so that a 2.5" vacuum hose end friction fits on the outside of the adapter, rather than on the inside. This approach may cause compatibility issues, but so far it seems to work just fine.

It's designed to be printed with the airlock end down and without supports. For my testing I've been using Duramic PLA+ at .4 layer height with a .6 nozzle, 2 perimeters and 15% infill. I would expect regular PLA and PETG to work just fine.

Tagi