Mounting bracket for IKEA TRÅDFRI 30w & BESTA
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Add your IKEA Tradfri to the back of your BESTA shelf (or any other back)
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 71
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This mount allows you to attach the led driver directly to the back of the IKEA BESTA shelf (or any other).
Included is the fusion360 file (it's a bit messy) to allow for your own modifications.
Versions
There is a 45deg angled version (which I used) and another untested and slightly slimmer version to mount it to the side. If I'm not mistaken, you can simple use the mirror function in Prusa slicer to change the mounting side / direction.
You can (and probably should) use a m3 screw to keep the driver in place (technically you can add up to 3 in each notch, but one is enough) - I used a 10mm long one, but you can definitely use a shorter one
I used 3,9x22 PH fast wood screws to mount it to my BESTA shelf.
Print Settings
Printed with (cheap) PETG
0.4 nozzle
0.2 layers
10-15% infill
Speed Profile (although technically it's a mechanical part and Structural would be better)
so technically everything default, feel free to adjust wall / vertical shells and infill (pattern) if you need extra strength and have the time.
Fusion360 File
It's not perfectly structured and probably not fully constrained, but should help you to do modifications in case you need to. Most of it has user parameters
If you use BESTA, I highly recommend to print these as well:
(yes I know I fckd up the name, tradifi -> tradfi 😂)