LayersFactory
Zgłoś model
1 / 4
Rotating Wardrobe Bag Carousel | $\phi 25$mm Rod Organizer — zdjęcie 1
1 / 4

Rotating Wardrobe Bag Carousel | $\phi 25$mm Rod Organizer

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Paciu

Paciu

@Paciu_2190132

360° Smooth Rotation: Browse your collection with ease.

Ocena
0 / 5
Polubienia
6
Pobrania
11
Wydruki
0
Wyświetlenia
43
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other House Equipment
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (3)Powiązane

Rotating Wardrobe Bag Carousel | $\phi 25$mm Rod Organizer

Description

Tired of bags and backpacks cluttering your wardrobe floor? This Rotating Bag Carousel is a heavy-duty, modular solution designed specifically for standard 25mm ($\phi 25$) wardrobe rails.

The design features a unique threaded assembly system, meaning no glue is required. It allows for a full 360° rotation, giving you easy access to up to 8 bags or accessories while keeping them neatly organized and off the ground.

Key Features:

  • 360° Smooth Rotation: Browse your collection with ease.

  • Screw-Threaded Design: Robust and secure assembly without tools or glue.

  • 8 Hook Capacity: Optimized S-shape hooks to prevent handle deformation.

  • Perfect Fit: Snaps securely onto any standard 25mm pipe.

  • Professional Files: Includes STEP files for easy remixing and 3MF for quick slicing.

Print Settings

These settings have been tested using Prusament ASA to ensure maximum durability and a premium finish.

  • Filament: ASA (highly recommended for mechanical strength).

  • Layer Height: 0.2 mm.

  • Wall Loops / Perimeters: 4 (Crucial for the strength of the hooks and threads).

  • Infill: 15% (Grid or Gyroid recommended).

  • Supports: Required for the main rail hook. Tree supports are recommended (see my process photos for orientation).

  • Heat: Recommended enclosure for ASA to ensure perfect layer adhesion.

Assembly Instructions

  1. Preparation: Print all parts (1x Main Hook, 1x Cross Stabilizer, 1x Outer Ring, 8x S-Hooks).

  2. Ring Placement: Slide the Rotating Ring over the center shaft of the Main Hook.

  3. The Thread: Screw the Cross Stabilizer into the bottom of the Main Hook. Tighten it by hand – the threads are designed for a snug fit.

  4. Add Hooks: Click the 8 S-Hooks into the slots around the outer ring.

  5. Installation: Snap the entire unit onto your $\phi 25$mm wardrobe rod.

Technical Files & Licensing

  • STEP Files: Included for those who wish to modify the rod diameter or hook shapes.

  • 3MF Files: Pre-configured with my recommended print orientation and support blockers.

  • License: Creative Commons - Attribution - Share Alike. You are free to remix and share, but please credit the original design.

Tagi

prusamentorganizerhangerrotatingwardrobestoragehomecloset25mmthreadedcarousel