MP07-IONA-US USB-C Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is just a small protective case for my MP07-IONA-US, the version with the USB-C power port.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 82
- Wydruki
- 0
- Wyświetlenia
- 810
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is just a small protective case for my MP07-IONA-US, the version with the USB-C power port.
The lid snaps on and the board is screwed into the bottom using short M3 machine screws. Mine were around 8mm or so, but they really need washers or spacers of some kind at that length. 5mm is probably a better choice.
This is a BETA version. The lid is pretty tight tolerance wise and I needed to sand it a small bit to get it to close right. I will try and revise this to make it a little more forgiving.