Base for Manuel's stackable tea bag dispenser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Base to raise the dispenser off the shelf or work top, makes it easier to grab the bags.
- Ocena
- 0 / 5
- Polubienia
- 28
- Pobrania
- 93
- Wydruki
- 0
- Wyświetlenia
- 752
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I use this great model by Manuel, works well with most teabags I have.
But found it a bit difficult to grab the bags when the dispensers are on a shelf or on the kitchen worktop.
This base should make it a bit easier by raising the dispensers.
I used the top part of the original dispenser to keep the same design.
There are 1 to 4 units wide bases to keep the dispensers together.
(On my prints the interlock on the dispensers is not very strong, but that is probably due to printing with 0.6mm nozzle)
I printed in Prusament PETG Galaxy Black
Bart