Base for Manuel's stackable tea bag dispenser
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Base to raise the dispenser off the shelf or work top, makes it easier to grab the bags.
- Rating
- 0 / 5
- Likes
- 28
- Downloads
- 93
- Makes
- 0
- Views
- 752
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I use this great model by Manuel, works well with most teabags I have.
But found it a bit difficult to grab the bags when the dispensers are on a shelf or on the kitchen worktop.
This base should make it a bit easier by raising the dispensers.
I used the top part of the original dispenser to keep the same design.
There are 1 to 4 units wide bases to keep the dispensers together.
(On my prints the interlock on the dispensers is not very strong, but that is probably due to printing with 0.6mm nozzle)
I printed in Prusament PETG Galaxy Black
Bart