1 / 4
BetaFPV Air 65 TPU Canopy for RunCam Nano 4 — zdjęcie 1
1 / 4

BetaFPV Air 65 TPU Canopy for RunCam Nano 4

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A flexible TPU canopy for the BetaFPV Air 65 II frame, made to fit the RunCam Nano 4. Based on WE are FPV's model.

Ocena
0 / 5
Polubienia
7
Pobrania
45
Wydruki
0
Wyświetlenia
340
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Version 1 is simply a widened lens diameter (from 10mm original to 12mm for RCN4). I would recommend this version. It is a very snug fit around the lens.

Version 2 is slightly experimental. It has slots cut into the lens mount to enable the screw mounts on the RC Nano 4 to be pushed further into the canopy. This leaves more space for components such as the VTX antenna to be positioned behind the canopy. However, it arguably weakens the canopy and I have found it to be a looser fit, potentially causing vibrations. I'm looking to improve this model in the future.

Printed with Elegoo 95A TPU, translucent.

Tagi