CR-10/ Tevo Tornado MGN12 X carriage adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This adapter allows you to mount the stock CR10 (not tested) or Tevo Tornado (Tested) metal x carriage mount to an…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 338
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This adapter allows you to mount the stock CR10 (not tested) or Tevo Tornado (Tested) metal x carriage mount to an MGN12 H rail.
Just need to print the adapter, and re mount your rail.
Tips:
- When mounting rails they MUST be centered. I would strongly recommend you print thing:2152669 to align the rail on a 2020 extrusion
This mount is also compatible with the following Titan Aero Mounts:
NOTE: Working on v4 to allow for x endstop mount placement
Instructions/Considerations
Belt Clearance
When using this mount on the Rail the standard X motor mount and pully does not allow for enough clearance between the rail and the belt; you need to modify:
* Remove the stock x end stop plate holder, and replace the top right hand screw with a free floating idler for the belt to rest on * Print and attach the Tarantula X-Axis Idler mounts to raise the belt over the rail. you just need the idler mount, not the Motor.Category: 3D Printer Parts