CR-10/ Tevo Tornado MGN12 X carriage adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This adapter allows you to mount the stock CR10 (not tested) or Tevo Tornado (Tested) metal x carriage mount to an…
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 41
- Makes
- 0
- Views
- 338
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
This adapter allows you to mount the stock CR10 (not tested) or Tevo Tornado (Tested) metal x carriage mount to an MGN12 H rail.
Just need to print the adapter, and re mount your rail.
Tips:
- When mounting rails they MUST be centered. I would strongly recommend you print thing:2152669 to align the rail on a 2020 extrusion
This mount is also compatible with the following Titan Aero Mounts:
NOTE: Working on v4 to allow for x endstop mount placement
Instructions/Considerations
Belt Clearance
When using this mount on the Rail the standard X motor mount and pully does not allow for enough clearance between the rail and the belt; you need to modify:
* Remove the stock x end stop plate holder, and replace the top right hand screw with a free floating idler for the belt to rest on * Print and attach the Tarantula X-Axis Idler mounts to raise the belt over the rail. you just need the idler mount, not the Motor.Category: 3D Printer Parts