1 / 7
Positive Pressure Box Air Filter
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fan/airfilter unit for DIY positive pressure box
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 38
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Chemistry & Biology
- Licencja
- GNU General Public License v3.0
A case for a AER1 HAPF300 (https://filter-monster.com/products/h-hapf300-fm ) filter, with spots to press fit two 80mm computer fans. Unit was JBWelded into a box, and powered with a 12V wall wart. I also place a carbon prefilter sheet over top of the fans, just to try and keep it a little cleaner.
I did have to cut it into two parts using my slicer and glue them together, then to seal up everything I used electrical tape to try and make sure all the air only was pulled in through the fans, and reduce how much air was going out around the case