Soapy Joe Card Logo Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple snap-in cover for Soapy Joe cards that hides the logo and gives the card a cleaner, more minimal look
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 23
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
A simple cover for a Soapy Joe card or sticker. The card slides inside and the front panel hides most of the original logo so it looks cleaner and more minimal.
The fit is snug so the card stays in place, but you can still pull it out and swap it if needed.
Print orientation and supports:
Place the model on its long back edge, with the barcode recess facing up (as in the screenshots). Enable tree supports from the build plate so they grow up to the small overhang above the slot. With this orientation and supports, the top edge of the slot prints clean and you should get a result similar to the photos.
Works well in PLA, PETG or similar materials.