1 / 5
X & Y Motor Mounts with Tensioning for Rolohaun SimpleCore — zdjęcie 1
1 / 5

X & Y Motor Mounts with Tensioning for Rolohaun SimpleCore

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Redesigned the stock mounts to include tensionability for the X & Y belts.

Ocena
5 / 5
Polubienia
9
Pobrania
28
Wydruki
1
Wyświetlenia
220
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike
Revision Log
  • 2026-02-09 -- Initial Release

  • 2026-02-10 -- Added vertical ribs for stiffness.

BOM:
  • Qty 6 - M3 Brass Inserts

  • Qty 12 - M3 x 8 Flat Head Cap Screws

    • 4 to attach each motor to the carriage.

    • 2 to attach each retainer to the base.

  • Qty 2 - M3 x 16 Socket Head Cap Screw

  • Qty 2 - 6x2 Magnets (Optional, to give the jack screw a harder surface to push against than plastic.)

Print Settings:

Material Used: Inland (Micro Center) PETG-CF

I just followed the Voron spec for this one:

Use PETG-CF or Better

  • Layer height: 0.2mm

  • Extrusion width: 0.4mm, forced

  • Infill percentage: 40%

  • Infill type: gyroid

  • Wall count: 4

  • Solid top/bottom layers: 5

  • Supports: NONE

Tagi