X & Y Motor Mounts with Tensioning for Rolohaun SimpleCore
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Redesigned the stock mounts to include tensionability for the X & Y belts.
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 28
- Makes
- 1
- Views
- 220
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Revision Log
2026-02-09 -- Initial Release
2026-02-10 -- Added vertical ribs for stiffness.
BOM:
Qty 6 - M3 Brass Inserts
Qty 12 - M3 x 8 Flat Head Cap Screws
4 to attach each motor to the carriage.
2 to attach each retainer to the base.
Qty 2 - M3 x 16 Socket Head Cap Screw
Qty 2 - 6x2 Magnets (Optional, to give the jack screw a harder surface to push against than plastic.)
Print Settings:
Material Used: Inland (Micro Center) PETG-CF
I just followed the Voron spec for this one:
Use PETG-CF or Better
Layer height: 0.2mm
Extrusion width: 0.4mm, forced
Infill percentage: 40%
Infill type: gyroid
Wall count: 4
Solid top/bottom layers: 5
Supports: NONE