POWERBAIT Berkley Tower/Case Storage Container
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed for use in fishing/tacklebox bags. Printable with NO SUPPORTS. Holds 4 Containers, model exported in Inches.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 153
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
I designed this for use in fishing/tackle bags primarily. The flat side on the right is intended to serve as a guide for tackleboxes, but the case can also be mounted from that side as well (with the addition of some screw holes). Feel free to remix/redesign however to fit your individual needs!
I printed this in Elegoo PLA on a Centauri Carbon printer. I had the model oriented vertically and it worked great! my settings were as follows:
0.2mm Layer Height, 0.4mm nozzle, 21% infill, 4 wall loops, and print inner/outer wall first. I might change this last setting though to improve the quality on the overhangs.
Thanks for checking this out and I hope it works well for you!