POWERBAIT Berkley Tower/Case Storage Container
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designed for use in fishing/tacklebox bags. Printable with NO SUPPORTS. Holds 4 Containers, model exported in Inches.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 33
- Makes
- 0
- Views
- 153
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
I designed this for use in fishing/tackle bags primarily. The flat side on the right is intended to serve as a guide for tackleboxes, but the case can also be mounted from that side as well (with the addition of some screw holes). Feel free to remix/redesign however to fit your individual needs!
I printed this in Elegoo PLA on a Centauri Carbon printer. I had the model oriented vertically and it worked great! my settings were as follows:
0.2mm Layer Height, 0.4mm nozzle, 21% infill, 4 wall loops, and print inner/outer wall first. I might change this last setting though to improve the quality on the overhangs.
Thanks for checking this out and I hope it works well for you!