1 / 6
Race Car Port w/o car (compatible w. LEGO plates) — zdjęcie 1
1 / 6

Race Car Port w/o car (compatible w. LEGO plates)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A car port i made for some modells of my son. Consists of unique toy bricks LEGO never made (but fully compatible)

Ocena
0 / 5
Polubienia
2
Pobrania
3
Wydruki
0
Wyświetlenia
38
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a self-made car port. You should print the walls with support because they are thin and tall. The gap on to the bottom of each of the pillars/poles has enough space for LEGO bricks, as you can see in the appended pictures.  

You have to print in the following quantities:

4x Pillar/Pole
3x Wall
12x Toy brick (but you can use existing (LEGO) bricks)

As bottom i recommend to use a plate like shown in the photos (20x20 top connectors)

Next step(s):

Within that month i plan to publish 2 more modells:

  • A car port ceilling with top connectors

  • Two toy bricks (2x2 an 4,2 LEGO compatible) with a pillar compatible Guide Slot 

Tagi