Skadis Thin Steel Spatula Holder (Japanese Spatula/Japanspachteln)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple holder for thin steel spatulas using @fivesixzero's Skadis Hooks
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 44
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
As I didn't find a ready made holder for these thin steel spatulas (Japanspachtel) I quickly made my own.
I'm using the hooks from https://www.printables.com/model/284350-skadis-hook-for-heat-set-inserts-m25 as I find these much better as the usual Skadis hooks.
For the hooks you'll need some M2.5 heat inserts and M2.5x8 screws. See the page for the hooks for more info.
The slots for the spatulas are a little bit wider than the spatulas themselves. I just added 2mm to the given width of the spatula but obviously the are a little bit smaller.
Hope this will fit spatulas from other brands. Let me know...
Print this upside down (top to prinbed). You won't need support.
I used PLA with 0.25 layer height and 15% infill.