1 / 2
Skadis Thin Steel Spatula Holder (Japanese Spatula/Japanspachteln) — image 1
1 / 2

Skadis Thin Steel Spatula Holder (Japanese Spatula/Japanspachteln)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Simple holder for thin steel spatulas using @fivesixzero's Skadis Hooks

Rating
0 / 5
Likes
0
Downloads
5
Makes
0
Views
44
Reviews
0

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution — Noncommercial — Share Alike

As I didn't find a ready made holder for these thin steel spatulas (Japanspachtel) I quickly made my own. 

I'm using the hooks from https://www.printables.com/model/284350-skadis-hook-for-heat-set-inserts-m25 as I find these much better as the usual Skadis hooks. 

For the hooks you'll need some M2.5 heat inserts and M2.5x8 screws. See the page for the hooks for more info. 

The slots for the spatulas are a little bit wider than the spatulas themselves. I just added 2mm to the given width of the spatula but obviously the are a little bit smaller. 
Hope this will fit spatulas from other brands. Let me know...

Print this upside down (top to prinbed). You won't need support. 
I used PLA with 0.25 layer height and 15% infill. 

Tags