Vintage Mesh Radio Base (HeltecV3 and HeltecV4)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Vintage radio style model to hold electronics for Meshtastic or MeshCore nodes. Works with N type or SMA antennas.
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 33
- Wydruki
- 1
- Wyświetlenia
- 246
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
Printed parts necessary:
1x Radio Base
1x Faceplate Base
1x Faceplate Mesh
1x Backplate
4x Feet (optional)
1x Antenna Adapter (optional)
Frontplates, backplates, and feet are attached to the base using M3 bolts and hex nuts. I have used 6mm bolts, however longer ones should work without interference. The faceplate mesh should press fit into place, but you may find that you need to scale it up or down slightly for this to be secure.
Frontplate and backplates are the same size, so there is flexibility depending on which side you want the "front" to be.