1 / 2
Vintage Mesh Radio Base (HeltecV3 and HeltecV4) — image 1
1 / 2

Vintage Mesh Radio Base (HeltecV3 and HeltecV4)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Vintage radio style model to hold electronics for Meshtastic or MeshCore nodes. Works with N type or SMA antennas.

Rating
5 / 5
Likes
5
Downloads
33
Makes
1
Views
247
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution

Printed parts necessary:
1x Radio Base
1x Faceplate Base
1x Faceplate Mesh
1x Backplate
4x Feet (optional)
1x Antenna Adapter (optional)

Frontplates, backplates, and feet are attached to the base using M3 bolts and hex nuts. I have used 6mm bolts, however longer ones should work without interference. The faceplate mesh should press fit into place, but you may find that you need to scale it up or down slightly for this to be secure.

Frontplate and backplates are the same size, so there is flexibility depending on which side you want the "front" to be.