1 / 2
Black and Decker Dustbuster HNVC115JB06 Vacuum Nozzle — zdjęcie 1
1 / 2

Black and Decker Dustbuster HNVC115JB06 Vacuum Nozzle

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A long nozzle that fits the Black and Decker Dustbuster HNVC115JB06.

Ocena
0 / 5
Polubienia
7
Pobrania
32
Wydruki
0
Wyświetlenia
132
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

I needed a long nozzle to fit into narrow areas, so I made one. It seems to keep a good seal around the insertion point and keeps good vacuum.

Below are the settings I used. These are only a recommendation as this will probably print with most default settings and profiles and filaments.

  • Printer: Prusa MK4

  • Filament: PETG

  • Perimeters: 4

  • Seam Position: Rear

  • Infill: I did 100% but if you do 4 perimeters it's all perimeters anyway

  • Prints upright with no supports needed.

  • All other parameters default.

Tagi