VMINION Raspberry Pi Camera Mount – Easy X-Axis Holder (Tool-Free Camera Fit)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This holder is designed to mount a Raspberry Pi Camera on the VMINION
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 26
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
VMINION PiCam Holder – Single Screw Mount
This holder is designed to mount a Raspberry Pi Camera on the VMINION using a very simple installation.
The bracket attaches directly to the end of the X-axis using a single screw. No additional adjustments or modifications are required, making the installation quick and straightforward.
The Pi Camera fits precisely into its slot without the need for screws. The tolerances are designed to provide a snug, secure fit while still allowing the camera to be inserted and removed easily if needed.
Important
To install the holder, the original screw must be replaced with a screw that is 2 to 3 mm longer in order to compensate for the thickness of the mount and ensure proper fastening.
Features
Mounts on the X-axis end with only one screw
No printer adjustments required
Snap-fit style camera slot (no screws needed)
Clean and minimal design
Easy to install and remove
Designed to be simple, reliable, and fast to install.