1 / 4
Breville Single Dose Funnel - Barista Express BES860XL — zdjęcie 1
1 / 4

Breville Single Dose Funnel - Barista Express BES860XL

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a single dose funnel that snaps into the 1st edition Barista Express.

Ocena
0 / 5
Polubienia
0
Pobrania
9
Wydruki
0
Wyświetlenia
68
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial

Breville Barista Express (BES860XL) Single Dose Attachment

Upgrade your older Breville Barista Express (rectangular hopper model) to a single-dose workflow. This 3-piece kit reduces retention and features a custom-engineered snap-fit for easy installation.

Features

  • Mechanical Snap-Fit: Features integrated locking nubs to secure the attachment to the machine.

  • Flex-Release Design: The rear nub includes a relief slit, allowing it to flex for easy removal without snapping the plastic.

  • Safety Switch Compatible: The front nub is solid and slightly longer to reliably engage the internal grinder safety switch.

  • Clean Print: Designed as a multi-part assembly to ensure the best possible surface finish without the mess of large-scale supports.

The 3 Parts

  1. Main Attachment: Fits into the rectangular hopper slot.

  2. 11mm Funnel Extension: Glue this to the bottom of the main attachment. This guides beans directly into the burrs and prevents them from getting trapped underneath the unit.

  3. Funnel Cap: Keeps your workspace clean.

Assembly & Orientation

  • Front: Insert the solid, longer nub into the front of the machine to activate the grinder switch.

  • Back: The nub with the relief slit goes to the back. This provides the flex needed to "unclick" the unit for cleaning.

Print Settings

  • Nozzle: 0.4mm

  • Supports: Minimal. Use "Tree Supports (Touching Buildplate Only)" to support the two small nubs. This creates two tiny ~4mm trees that pop off easily.

  • Infill: 20%

  • Orientation: Print the main attachment with the large square face down on the bed.

Tagi