DJI Mini 5 Pro box with foam lining.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Based on Jiří Velan's excellent design. Replaced the TPU printed internal lining with a laser-cut rubber foam.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 530
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
Based on Jiří Velan’s excellent design, I replaced the TPU-printed internal lining with laser-cut rubber foam. Instead of printing the inner lining in FLEX/TPU, I created 2D cross-sections from the original flexible inner part and saved them as DXF files. Using these DXFs, I laser-cut the lining from 20 mm-thick rubber foam. Three identical foam pieces were stacked to form the complete lining. I also glued a thin foam layer (~2 mm) to the bottom of the box and another to the lid to ensure the drone is held securely in place when the box is closed.