Padel racket ball holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Padel ball catcher / holder. This attached to the top of your racket. Can help with people who have trouble bending
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 242
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Indoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Padel ball catcher / holder. This attached to the top of your racket. Can help with people who have trouble repeatedly bending over to grap the ball. Add some velcro tape to the inside of the holder to make the ball stick. If you are fit enough than this tool probably isn't necessary :)
I only have Bambu Studio so for the custom racket shape plate, you'll need to add a negative part on your own slicer.
Pick the correct version for your racket.
I've made three versions of the holder since there are many different racket shapes. Either pick one of the two premade versions or cut to match your racket shape. Below are some instructions for that third plate.
Open the 3MF in Bambu Studio.
Select the custom racket shape plate and select the negative transparant part
3. Select the scale option at the top and disable the uniform scale.
4. Move the green block up and down so that the shape changes.
5. Align as needed
