1 / 2
box tube caps 3/4" x 3/4" 18 swg Mild Steel Box CAPS — zdjęcie 1
1 / 2

box tube caps 3/4" x 3/4" 18 swg Mild Steel Box CAPS

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Push-fit end caps for 3/4" x 3/4" x 18 SWG steel box section, ideal for legs and frames.

Ocena
0 / 5
Polubienia
1
Pobrania
6
Wydruki
0
Wyświetlenia
34
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution

3/4" × 3/4" × 18 SWG Mild Steel Box Section – End Caps
or 19.05 × 19.05 × 1.2 mm mild steel box

These end caps are designed to neatly finish 3/4" x 3/4" x 18swg mild steel box section, ideal for furniture legs, frames, jigs, stands, and general fabrication projects.

They TAP into the open end of the box section for a friction fit, to provide a clean, finished appearance while also helping to protect floors, reduce sharp edges, and keep dirt and debris out of the tube.

Features

  • Sized specifically for 3/4" x 3/4" × 18swg / 19.05 × 19.05 × 1.2 mm mild steel box

  • Clean, flush-fitting design

  • Helps protect floors and surfaces

  • Ideal for table legs, benches, racks, and workshop builds

  • Simple push-fit installation

Printing Notes

  • Print flat on the bed

  • No supports required

  • 0.2 mm layer height recommended

  • PLA works for light-duty use

  • PETG or TPU recommended for durability and impact resistance

Installation

  • Press-fit by hand or lightly tap into place

  • Can be glued if a permanent fit is required

A simple, practical solution for finishing off box section neatly and professionally.

I've included a STEP file for CAD purposes. 

Tagi