box tube caps 3/4" x 3/4" 18 swg Mild Steel Box CAPS
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Push-fit end caps for 3/4" x 3/4" x 18 SWG steel box section, ideal for legs and frames.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 6
- Makes
- 0
- Views
- 34
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
3/4" × 3/4" × 18 SWG Mild Steel Box Section – End Caps
or 19.05 × 19.05 × 1.2 mm mild steel box
These end caps are designed to neatly finish 3/4" x 3/4" x 18swg mild steel box section, ideal for furniture legs, frames, jigs, stands, and general fabrication projects.
They TAP into the open end of the box section for a friction fit, to provide a clean, finished appearance while also helping to protect floors, reduce sharp edges, and keep dirt and debris out of the tube.
Features
Sized specifically for 3/4" x 3/4" × 18swg / 19.05 × 19.05 × 1.2 mm mild steel box
Clean, flush-fitting design
Helps protect floors and surfaces
Ideal for table legs, benches, racks, and workshop builds
Simple push-fit installation
Printing Notes
Print flat on the bed
No supports required
0.2 mm layer height recommended
PLA works for light-duty use
PETG or TPU recommended for durability and impact resistance
Installation
Press-fit by hand or lightly tap into place
Can be glued if a permanent fit is required
A simple, practical solution for finishing off box section neatly and professionally.
I've included a STEP file for CAD purposes.