Gearbox servo mount for CR18P evo pro
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This mod allows you to move the gear shift servo from the side plate to the gearbox housing in CR18p from Hobbyplus
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 190
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
This mod allows to move the servo responsible for shifting gears from the side plate to the gearbox housing. This, in turn, allows the ESC to be moved further forward, thus shifting the weight to the front.
Designed to accommodate both the left and right driveshaft spindles. Mounting can be done using the screws included with the gearbox. The servo is mounted using M2 screws (8-10 mm).
The servo must be properly calibrated in the transmitter and its operating direction must also be changed to reverse.
I made a new servo-to-gearbox connector from a paper clip.
Printed in PLA
Enjoy!