Kartikey's Moka Pot Funnel & Holder (Primula 6-cup Stainless Steel)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Kartikey Anand's models resized and test-fitted for a Primula 6-cup stainless steel moka pot's coffee basket.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 45
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
A resize of Kartikey Anand's 3-cup moka pot accessories, measured and test-fitted for a Primula 6-cup stainless steel coffee basket.
The exterior diameter of the coffee basket's upper flange is 78.1mm in diameter. I used ~78.6mm as the interior diameter of the funnel's lower lip to make sure it wasn't too tight, adjusting X & Y dimensions but left the Z dimension at the original value.
The coffee basket's stem is ~40mm-- I increased its overall scale using a 45mm Z-height.
I would suggest using supports on both models. They should be on by default is you import the 3MF as a project. Defaults are set to MK4IS 0.4mm nozzle with 0.2mm Speed & Jessie PLA.