Kartikey's Moka Pot Funnel & Holder (Primula 6-cup Stainless Steel)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Kartikey Anand's models resized and test-fitted for a Primula 6-cup stainless steel moka pot's coffee basket.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 9
- Makes
- 0
- Views
- 46
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Share Alike
A resize of Kartikey Anand's 3-cup moka pot accessories, measured and test-fitted for a Primula 6-cup stainless steel coffee basket.
The exterior diameter of the coffee basket's upper flange is 78.1mm in diameter. I used ~78.6mm as the interior diameter of the funnel's lower lip to make sure it wasn't too tight, adjusting X & Y dimensions but left the Z dimension at the original value.
The coffee basket's stem is ~40mm-- I increased its overall scale using a 45mm Z-height.
I would suggest using supports on both models. They should be on by default is you import the 3MF as a project. Defaults are set to MK4IS 0.4mm nozzle with 0.2mm Speed & Jessie PLA.