CoreONE+ Narrow Spoolholder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A longer (100mm), thinner (20mm) spool holder for the CoreONE+ spool holder puck.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 67
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v2.0
I've got a couple of old, non-standard spools that didn't fit on the CoreONE filament hanger. This model is a modification of the CoreONE+ spoolholder to extend it and shrink it down to hold a spool that's 90mm wide with a center hole 30mm in diameter.
I maintained the CoreONE+ design features where possible given the size constraints.
Recommended print settings (inherited from the CoreONE+ upgrade files):
Layer height: 0.2 mm
Infill: 20%
Infill pattern: Grid
Brim: Optional
No supports should be necessary.
Also attached is the quick-and-dirty OpenSCAD script I used to generate the model. Just update the path to the CoreONE+ Upgrade community edition spoolholder and set your parameters as desired if you want to create a different size.