CoreONE+ Narrow Spoolholder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A longer (100mm), thinner (20mm) spool holder for the CoreONE+ spool holder puck.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 10
- Makes
- 0
- Views
- 67
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- GNU General Public License v2.0
I've got a couple of old, non-standard spools that didn't fit on the CoreONE filament hanger. This model is a modification of the CoreONE+ spoolholder to extend it and shrink it down to hold a spool that's 90mm wide with a center hole 30mm in diameter.
I maintained the CoreONE+ design features where possible given the size constraints.
Recommended print settings (inherited from the CoreONE+ upgrade files):
Layer height: 0.2 mm
Infill: 20%
Infill pattern: Grid
Brim: Optional
No supports should be necessary.
Also attached is the quick-and-dirty OpenSCAD script I used to generate the model. Just update the path to the CoreONE+ Upgrade community edition spoolholder and set your parameters as desired if you want to create a different size.