Shower Cabin Sliding Door "Roller" Wheel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print-in-place replacement roller wheel for shower cabin doors
- Ocena
- 5 / 5
- Polubienia
- 61
- Pobrania
- 722
- Wydruki
- 0
- Wyświetlenia
- 1982
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution
I have had issues with the original rollers of my shower cabin doors as they were running/sliding on plastic wheels with roller bearing hubs.
Unfortunately those roller bearings are not stainless steel so they rust and seize up quite quickly.
I got tired of buying replacement wheel assemblies and replacing them every year or so.
This wheel is a print is place replacement to solve this issue. When these wear out it is easy to replace them. A single screw holds them in place. No need to take off the whole wheel assembly from the glass door.
The model has a small hole that should be used to inject some grease between the two sliding parts of the wheel. With grease they will last in excess of 2 years.
I have included a .f3d file as well in case anyone needs to adjust the diameter of the wheel.
Slicer setting I have used:
0.2mm layer height
80% infill (minimum) - 100% recommended
If you like the design please show it by clicking the like ♥ button. Thank you!
Happy 3D printing!