Shower Cabin Sliding Door "Roller" Wheel
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Print-in-place replacement roller wheel for shower cabin doors
- Rating
- 5 / 5
- Likes
- 61
- Downloads
- 722
- Makes
- 0
- Views
- 1,982
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution
I have had issues with the original rollers of my shower cabin doors as they were running/sliding on plastic wheels with roller bearing hubs.
Unfortunately those roller bearings are not stainless steel so they rust and seize up quite quickly.
I got tired of buying replacement wheel assemblies and replacing them every year or so.
This wheel is a print is place replacement to solve this issue. When these wear out it is easy to replace them. A single screw holds them in place. No need to take off the whole wheel assembly from the glass door.
The model has a small hole that should be used to inject some grease between the two sliding parts of the wheel. With grease they will last in excess of 2 years.
I have included a .f3d file as well in case anyone needs to adjust the diameter of the wheel.
Slicer setting I have used:
0.2mm layer height
80% infill (minimum) - 100% recommended
If you like the design please show it by clicking the like ♥ button. Thank you!
Happy 3D printing!