Beer candle (mold master)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mold master for creating silicone mold for beer candle or soap
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 132
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a mold master for creating mold from silicone rubber.
You can than use that mold for casting candles or soap.
This beer is about 7cm in height.
How to do a silicone mold
Print the mold master and put the cover onto the beer itself

Take a hot glue gun and seal the bottom edge

Prepare about 110ml of silicone. Mix it properly and pour into the container.

Let it harden for about 3 hours (or what your silicone label says).
When the silicone is hard, remove the outer shell by force. The model will be likely destroyed in this process. Wear safety glasses for this step.
Turn the mold bottoms up and use sharp knife to gently cut the silicone, to be able to remove the inside master. DO NOT CUT TO THE VERY BOTTOM. Just enough for you can remove the master (and the candle later).

Optionally take a rubber band and carefully put it over the silicone mold, for better sealing of the cut.