Large Media Storage Organizer SD / microSD / USB Flash Drive
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A large media storage organizer holds 35 SD Cards, 15 microSD Cards, and 18 Flash Drives.
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 216
- Wydruki
- 0
- Wyświetlenia
- 1022
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Share Alike
I originally designed this media storage organizer to be made on my X-Carve CNC Router, but had a few people ask me for the .stl file, so here it is! This media storage organizer is designed to hold 35 SD Cards, 15 microSD Cards, and 18 standard USB Flash Drives.
I have tested this design to work with the following media storage, but it should work with all standard SD, microSD, and USB Flash Drives:
- SanDisk 128GB Ultra Flair USB 3.0 Flash Drive - https://amzn.to/3tTSmfL
- Samsung BAR Plus 32GB Flashdrive - https://amzn.to/372YtW7
- PNY 128GB Turbo Attache 3 USB 3.0 Flash Drive - https://amzn.to/3K6KqO8
- Kingston 128GB SDHC Memory Card - https://amzn.to/3NIvUxW
- PNY 128GB Elite microSDHC Flash Memory Card - https://amzn.to/3uEU3Nm
*Note: This post contains Amazon Affiliate links that support The Makers Workbench via a small commission from any sales they help generate.
Design File Included: .stl .f3d, .itp, step, .skp and obj files.
Follow The Makers Workbench on:
I have only tested this model using the default 0.20mm Linear Advance preset in Prusa Slic3r 2.2.0 with the following amendments made.
- 8-perimeters
- 5-top layers
- 5-bottom layers
- 20% infill
- Gyroid Infill
- Concentric Top and Bottom Pattern
PLA Used: Polymaker Polylite PLA - https://amzn.to/3mTrbuU