Lenovo SFF PC DVD Drive Blank Space Filler
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Covers the hole in the front of your small form factor Lenovo computer when you remove the old 5.25" DVD drive.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 80
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I have a small form factor Lenovo desktop which was turned in to a server. That's a story for another day but what's important is that I was left with an ugly hole in the front of the case. I quickly modeled this blank to fill the gap.
You can glue it or use 2 screws (in the 2 holes at the front) to hold it in place. It's designed with slight tolerances as not all 3D printers are equal.
0.24mm layer height
15% infill
3 outer walls, 3 bottom layers
PLA, PETG or ABS are all fine.
If this model is useful to you, consider checking out my YouTube channel (https://www.youtube.com/@RepairWins) I cover electronics repair, electronics modding, the odd DIY project, woodworking (if you stand a mile away and squint) and much more.