Funnel - Soap dispenser refill funnel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I need funnel to refill soap in touchless soap dispenser to safe money on buying proprietary refill bottles
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 107
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Share Alike
I need funnel to refill soap in touchless soap dispenser (dettol) into which I made a hole ~15mm to safe money on buying proprietary refill bottles.
Initial design created by AI via OpenSCAD code. I adapted parameters to my needs, if you want to adapt .scad file attached.
V2: For ~15mm holes in bottle to better soap flow even for thicker liquid soap like as I found that
V1: For ~7mm holes in bottle; only use with more "water-like" soaps or other thin liquids
Sliced in PrusaSlicer and printed in PLA+ on Elegoo Neptune 3 Pro with 0.4mm nozzle at 0.2mm layer height.