Dewalt TSTAK DWST1-70706 - Drawer Inserts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Some inserts to place inside the TSTAK drawer sections with lids.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 240
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These are some Inserts for the Dewalt TSTAK Drawers, they sit inside the drawer sections allowing you to put smaller items in, they have lids as well to stop spillage when you carry the drawers on their side.
There are options: -
Single box and friction fit lid
Quad section box with a fixed lid
Double section box with fixed lid
A flex live hinged lid for the double box
A flex live hinged lid for the quad or double box
A quad section box with a rear live hinged lid
The flex live hinged lids can be friction fit or glued in place if required.
The flex lid hinged at the rear can also have an 8x2mm magnet glued into the lid and a 3x4mm magnet in the base to secure the lid closed.
***NOTE***
New rear tray box STLs added that will fit in the rear of the drawers, they are a tight fit. The lid has the live hinge slighty more forward to allow opening without fouling.
Dewalt_Drawer_inserst_Double_Rear_Row_Box.STL
Dewalt_Drawer_inserst_Double_Rear_Row_Box_Lid.STL