1 / 5
Phyrexian Counter (for the Click-Wheel Life Counter v1) — zdjęcie 1
1 / 5

Phyrexian Counter (for the Click-Wheel Life Counter v1)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A 3D‑printed Click‑Wheel Life Counter update, adds Phyrexian Arabic numbers and new caps with mana/set symbols.

Ocena
0 / 5
Polubienia
7
Pobrania
52
Wydruki
0
Wyświetlenia
280
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Hi! Here's an update for the Click-Wheel Life Counter v1 that I made.

This update includes the following:

- Phyrexianized Arabic Numbers Wheel (both Left and Right)

- New Caps including the Phyrexian Mana Symbol (and WotC's Set Symbol for New Phyrexia, All Will be One and All Will be One Commander)

To use the Click-Wheel life counter you still need the shaft, which is in the original files. You can find that creation for free and also a few gifs that show you how to orient the files and print them [here](https://cults3d.com/:1254656):

[creation click-wheel-life-counter-v1-mtg-dnd-etc]

I want to specially thank Stas for making the Phyrexian Font v3.0 public. They also kindly released a Phyrexian Hexidecimal Numbers font just after I asked for help on that. You can find both fonts in this [link](http://myapps.blog/phyrexian_language_remapper.html)

If you like what I do, [Buy Me a Coffee](https://www.buymeacoffee.com/hypercritter), or a [Ko-fi](https://ko-fi.com/hypercritter).

This Phyrexian Update is unofficial Fan Content permitted under the Fan Content Policy. Not approved/endorsed by Wizards. Portions of the materials used, like the Phyrexian Mana Symbol and all of the Set Symbols are property of Wizards of the Coast. ©Wizards of the Coast LLC.

---

Updates

12/07/2024 - general changes, v1.1

wheels:

- changed the number's depth from 0.5[mm] to 0.9[mm]

- made the tooth thinner for easier movement

caps:

- added a feature that will help with supportless prints (at 1.2[mm] layer height)

- made the fit with the Pipe tighter

- added a 0.5[mm] chanfer at the base

- increased the depth of the different symbols

12/07/2024 - thicker wheels, v1.1

wheels:

- added a v1.1 with the old teeth so they're easier to print and use

- kept the deeper numbers tho

Tagi