Liczymy pasujące modele…
Share the love of The Gathering by giving your friends (and enemies) a giftcard! You can print the bunny tail and the TG logos in another color with a simple layer swap or just use a permanent marker for some extra style points! Thank you…
Hello! Thanks for checking out my first published model! This is my first time working on a model/print like this so please feel free to comment with questions, suggestions and requests! Features : Fallout/Atomic era styling Removable…
Simple and functional deck box with commander window. Specifically designed for EDH/Commander decks but can be used for any TCG. I never liked how much I had to squish my double sleeved commander decks; so, this is designed to hold 100+…
A simple Command Station for your EDH game. Count your life with three 22 mm D20 dice. The 22 mm MTG spin down dice work perfectly. You can also purchase them off of amazon. Three separate 22 mm D20 dice to keep track of Commander Damage.…
I went to the trouble of modifying the slotted plates (designated as v3 in the original) to work with the v1 Card Shuffler Shaft that uses O-rings as grippers. The positioning is slightly off for all 3, and the slots were widened ~1 mm…
Holds 100 sleeved cards. Holes in box designed for 3mm by 3mm magnets, depending on magnet size discrepancies and print tolerances you may need to glue magnets or heat plastic slightly to ensure a tight fit. Print with 20-25% infill, no…
Lid part 2 of 2 of Magic The Gathering deck box. Holds 100 sleeved cards. Holes in box designed for 3mm by 3mm magnets, depending on magnet size discrepancies and print tolerances you may need to glue magnets or heat plastic slightly to…
Wayward compass from hollow knight, the photos provided are alredy painted, but you also have a screenshot of the 3D model.
This came about as an option for my oldest whose out-grown the toy-filled calendars that are out there. WARNING: I did not design this to account for sleeves. If you are concerned about the collectible value or quality of your cards I…
This deck box was designed for a standard 60 card un-sleeved deck. Category: Games
This is a Magic the Gathering version of the Yu-Gi-Oh card holder I designed. http://www.thingiverse.com/thing:1562409 You need to print two of the holders and slide them together, then insert in one of the bases. EDIT: 06/24/19: I added…
Modeled from the card sleeves I use (normal, single sleeve). Dimensions: 2mm thick, 66mm wide and 95mm long (including the "notch") One photo contains one half of an deck box from…
This is my take on how to handle a lot of tokens. There are two sets of numbers that can range from 0-99. One on top and one on bottom. The bottom number can represent the total amount of tokens you have. While the top number can…
This is a MTG inspired Black Lotus. There are 2 different models. One lotus flower with a bud and one lotus flower without a bud. There are also 2 different stems. One is shorter (this is pictured in the photos) that is around 4 inches…
This is a remix of my Mass MTG Tokens design but instead of foil labels, these use a dry erase label. You will need some clear dry erase sticker sheets to create the label. I have included 4 different label templates you can use. Print…
This is a remix of Gimpel's awesome expanding deck box with an unlocking movement. A slight twist of the top makes the six locking mechanisms slide out and release it. While I was building two of these, I made at least small tweaks to…
A simple to print box for 100 card Commander Deck with friction-locked lid. It features a small chamfer on the inside that allows cards to get to and from the box easily.
made for Magic The Gathering cards and pokemon cards fit too
A book themed deck box for magic the gathering cards. Will fit non sleeved commander decks and sleeved normal decks depending on sleeve thickness. I would recommend TPU, but deck cover and bottom can be printed out of any material, the…
I originally designed this box to hold two MTG commander decks facing outward with a middle section to hold dice and other accessories. There's a similar box on Amazon. After making two for myself, I decided to add more options with…
Quick little box to store Magic: the Gathering cards. Should fit sleeved/unsleeved cards comfortably. It can fit a couple of deck boxes too (tested with GameGenic deck holders and Ultimate Guard deck cases. The corrugated sides make it a…
This is for personal use only, and is not to be used for commercial sale without also being a registered member to the patreon. If you are interested in selling any prints of 3D Printed Gaming models, more information can be found on the…
This is for personal use only, and is not to be used for commercial sale without also being a registered member to the patreon. If you are interested in selling any prints of 3D Printed Gaming models, more information can be found on the…
This is a simple circular Vigilance counter I made for my Tayam EDH deck. The .scad file is included if you want to change the icon or other parameters, the icon is from game-icons.net, download it as a png and convert it to svg with…
Additional Counters for @TonyYoungblood's Magic: The Gathering Counters . Main difference is the layer height for the indicators / icons / keywords that are printed on. I opted for 1mm so they fit in my box. Might change that in the…
This is a Magic: The Gathering commander deck box I designed for my girlfriend. It comfortably holds 100 single sleeved cards with some additional room for tokens. The top insert in the photos has the singer from Ghost on it but I've also…
Magic the Gathering Tournament Coin (Trophy) This custom-designed coin serves as a prize for our private Magic the Gathering tournaments, which we host with the release of every new MTG set. It's more than just a trophy—it's a lasting…
Made counter for MTG tokens, resources and monster stats changes. with the option to make the dials double sided like +1/+1 and -1/-1 on the same dial to save printing a lot of dials I used mtg icons and Google material symbols for the…
A decoration to hang on a wall or otherwise display, depicting five circles for the five basic mana icons in Magic: The Gathering (WUBRG), oriented the same as on the back of the cards. I printed it on a 5-color machine with a manual…
Card deck tray that can hold 100 sleeved cards (MTG commander deck) with space for graveyard and exiled cards below. Opening on back allows the opponents to see the remaining card in each space. Printed on its back without supports. I…
**This is for personal use only, and is not to be used for commercial sale without also being a registered member to the patreon.** If you are interested in selling any prints of 3D Printed Gaming models, more information can be found on…
Includes flippable asymmetric +1/+0 and +0/+1 counters. Both on each side! The font is slightly different than the original so I made a matching set of symmetric +1/+1 counters using the same style so your set will match. (Counters in…
A very simple, quick-to-print deck box. Fits single-sleeved cards nicely (+ a few bigger alternatives for thicker decks), with some wiggle room for a few tokens. This is meant as a “temporary” deck box that's fast to print, and perfect to…
See here for a video on how it looks like when it's working: https://www.instagram.com/p/DC7ZvZqqY5L/?igsh=ZG85azRucWNyZ2Ry Also, DM me there for questions. Description: I made a health bar style life counter for MtG using an Adafruit…
MTG mana stamps, perfect for pottery, cookies, or anything else you can think of!
I wanted to try my hand at a deck box for Magic: The Gathering which would fit a regular single-sleeved 100-card Commander deck as well as common extras like tokens and the precon life wheel, but with a twist: the front of the box should…
Shuffles double-sleeved Magic The Gathering cards. Printed in 3DPrintingCanada Canadian-Made PLA+ White, 0.4mm nozzle, 0.2mm layer height. The shafts I used were made for these O-rings (on amazon.ca): https://a.co/d/dgIRBcE: “uxcell…
My buddy is obsessed with his The Wise Mothman commander deck. With all the dice being thrown around between poison, commander damage, energy, rad counters, suspend counters, and the like, I thought this was an elegant, easy way to keep…
Here are a handful of tokens I have put together for my decks. I have also included blanks so anyone can add to any that I have missed or have been added to the game since I have made mine. The tray included in the files will fit a…
A steam trunk styled chest that can store 5 MTG deck boxes. It has room to store some D6 and D20 dice. The front latches are magnetic. They require 2 magnets per latch (0.75in diameter x .125in). The materials used are: Hatchbox Wood (box…
A 60 card deck box with the mana symbol inlays. This deck box is designed to work with my 5 Deck Box Chest. ( Guild symbols will need to be scaled to 76.33% to work with this style box.)
A magic the gathering playmat tube. The top is locked in place by way of a twist lock mechanism. July 3, 2025 version 2.2 now posted. Changes as follows: Internal length of each tube increased by 4.5mm on each side to properly fit a…
I got tired of the little cardboard markers that come with cards so decided to mess around in fusion and make some little marker coins. I grabbed the symbols from this font repo and cut them into a simple coin profile. Printed at 115%…
This advent calendar is made for MAGIC - The Gathering booster packs with up to 20 cards each. It can easily be biuld with some common aluminium construction profiles. A more detailled description with color scheme and printing…
Dividers for Wizards of the Coast | Magic: The Gathering with mana symbols in full cutout. 68 x 99 mm size. 1 mm thickness
I'm a simple man. I grew up using glass beads as tokens, and I like having objects instead of complicated dice or fancy Big City spinners. 10 is also half as complicated as 20, so poison counters are my weapon of choice (pit viper for…
This is for the game Gathering of the Wicked https://boardgamegeek.com/boardgame/343981/gathering-of-the-wicked inspired by the photocaddy work of BoardgameBarrio https://www.facebook.com/boardgamebarrio
The BCW Collectible Card Bins (e.g. https://www.bcwsupplies.com/collectible-card-bin-3200-gray ) come with 4 dividers. While more partitions can be purchased ( https://www.bcwsupplies.com/3200-card-bin-partition-gray ), they do not have…
This deck holder was designed to reduce tabletop space used during MTG Commander games. It has the following features: Library platform for 100 single-sleeved cards Grave platform for ~40 single-sleeved cards Exile platform for ~30…
Magic The Gathering Rugged Storage box. Includes removable inserts with 2, 3 or 4 compartments. This case is meant for bulk storage of cards and decks. You need 6X 35mm long m3 bolts + nut for the hinges and clasps. The box has an inlay…
A remix of hoiwurff’s stunning “Magic The Gathering Rugged Storage Box” for bulk storage of cards and decks (sleeved or unsleeved). Theirs is a remix of Whity's “Rugged Box with Modular Slots (Parametric) - Shallow height” Requires 6x…
A two part deckbox for Magic the Gathering mini / micro / small cards that fit in 35mm x 45 mm sleeve. Needs a rubberband to close.
This model is a desiccant holding insert for the Ultimate Guard Boulder 100+ Deck Box. It fits perfectly in a Boulder 100+ deck box with a 100 card, single sleeved, commander deck. I had been adding desiccant packets to my deck boxes in…
This is a stackable counter for magic the gathering game (or similar card game) for +1/ +1 counter. Figured it would be something different than the usual dice counters used in the game. For other types of counters (i.e +x / +x or -x /…
For those who want to share their dedication to their MTG colors, mix and match or stay mono colored. Printable also with color change to get matching mana colors for the symbol and the outer ring.
Get ready for The Gathering 2025 with some extra bling! Just a note, I've entered this into the Beads contest , this only applies to the “TG-Drawstring” models. Phone stand, drawstring jewels and LOGO_2 can be printed with a filament swap…
Keep track of your life points in style with this uniquely designed life counter, perfect for M agic: The Gathering , Elestrals , and other TCGs! Featuring an innovative planetary gear mechanism, this counter allows for smooth and precise…
This is a personal fan art project inspired by the universe of The Expanse. As a professional architect with a passion for science fiction, I wanted to reimagine the spaces and structures that might exist in this incredible world. I’ve…
Coasters designed around the foundation of Magic: The Gathering: the mana system. For color change, put in a color change at 1.8 mm (Layer 9 at 0.20 layer height, Layer 17 at 0.10 layer height) Printed with a 0.4 mm nozzle at 0.20 mm…
this is a REMIX and NOT my own design. Original here: https://www.printables.com/model/1034404-card-slinger-30-for-mtg-manabox-app-for-sleeved-an the original is not allowed to be modified nor to be sold - so ni respect to the original…
Magic the Gathering 1/1 Token, reversible to be a +1/1 or -1/1 depending on chevron direction as well as stackable. Print instructions Nothing complicated here, standard PLA settings should work great.
If you are a Norin the Wary EDH player and love outlandishly fun and completely unnecessary accessories for you EDH decks, then this card flipper is for you! I love playing my Norin EDH deck, but I was bored of repeatedly taking Norin in…
Share the love of The Gathering by giving your friends (and enemies) a giftcard! You can print the bunny tail and the TG logos in another color with a simple layer swap or just use a permanent marker for some extra style points! Thank you…
Magnetic Toploader Deckbox Hello, this is my custom deckbox design that I use to store and transport my commander decks! My goals while making it were: to not be much wider than your typical deckbox a strong magnetic lid that would be…
Sammelkarten scannen war noch nie so einfach! Dieser vollautomatische 3D-gedruckte Karten-Scanner wurde speziell für Magic: The Gathering entwickelt, kann aber auch mit Pokémon- und Yu-Gi-Oh!-Karten verwendet werden. Mit diesem Scanner…
MTG Magic the Gathering – Planechase Box Hey maker! 👋 A handy box for your Planechase cards (sleeved) with a magnetic lid. Features: Designed for round 5×5 mm magnets for a secure hold during transport. Keeps cards safe and organized.…
Modeled a hedron because I thought it would be fun.
**This is for personal use only, and is not to be used for commercial sale without also being a registered member to the patreon.** If you are interested in selling any prints of 3D Printed Gaming models, more information can be found on…
This is a remote part of my weather station, meant for measuring temperature/humidity/pressure and sending it via ESP-NOW to the main unit - ESP32S3/Lilygo T5 4.7 E-paper display . For anybody interested source code can be found here:…
The Planeswalker logo from the card game Magic: The Gathering as a simple five part model, either as a simple puzzle or for gluing together. The proposed colors are canonically correct. (My green filament doesn't look green in my…
I wanted something a little more sturdy and with a window. These will fit Dragon Shield sleeves. The Jumpstart Pack Minimal will hold 21 single-sleeved cards. The Storage box is designed to hold the larger windowed packs, and thus they…
Remix of Nathan Benjamin's excellent box - just without the cover
If you really really don't want your cards to fall over this one should keep them standing up. I made this for our shop but let me know if it doesn't work or if it needs some edits. Thanks!
simple deck box easy to use no supports needed.
This is an accessory I designed for use in Commander from Magic: the Gathering. It features: Symmetric design that allows for two double-sleeved 100 card decks to be stacked. I'd recommend during games that you use one side for your…
A token for Magic the Gathering used to indicate if your creature is suspected. Always hated how its a keyword that had multiple rules tied to it so I decided to make a file to indicate it clearer for newer players. Suitable for…
The One Ring is a well-known MTG card sold for ~$70 online. I made this colored 3D printable version without AMS as a gift to a friend and he was amazed. The art turned out very well and the text is legible. Currently exploring other…
Hey there, because i wasn't easily able to get the magnets Bmorr used, i remixed the design to use more standard round 5x2mm magnets. Yes, you can see them when the box is open. Yes, it will not be as strong as the original, but i can…
A Deck box for a 100 cards Deck like a MTG Commander Deck. Suits for any type of TCG Deck. This box support 100 sleeved cards. (I tested it only with cheap transparent sleeves. No money you know) This box uses 8 5x2mm neodymium magnets ;…
Level up your Magic: The Gathering games with these awesome +1/+1 counters! Designed with a fantasy-themed scrollwork border and bold, easy-to-read numbers, they make tracking creature buffs way easier—and way cooler. 🔹 Perfect for MTG –…
This deck holder was made to hold 100 sleeved cards during a game of commander. It's on an angle to help the cards stay in place when you draw them. It's dovetailed to allow it to be put in a bag without taking up too much room. Should be…
Magic: The Gathering storage tray with lid. One of each color and colorless. Made just small enough to fit my Bambu P1S.
Made these boxes to sort all my lands. 5 boxes fit perfectly into the boxes that come in a bundle. Each Box has a symbol matching a mana type on the side. Couldn't figure out to export from Prusa Slicer to STL so keep that in mind if…
This is a lightweight Magic: The Gathering deck box that I have designed. It is designed to hold a standard 60-card deck + tokens with classic Dragon Shield card sleeves.
Very simple boxes for sorting magic cards, with a slight slant to keep the cards from sliding out and a finger groove for extraction. They were designed to be printed on the back. They are stackable and have letters on the front to be…
Big thanks to @Nikolas Hoffmann and @LegendaryCheez for providing such fantastic models to build upon! The original tokens were flat and made using a multi-material printer, which I didn’t have access to. Instead, I redesigned each token…
Card sleeves are great for protection and easy shuffling, but stacked cards often fall over when sleeved. This holder keeps your sleeved cards neatly in place and provides a dedicated spot for your graveyard. Supports up to 100 sleeved…
"This 3D printed basic deck box is designed specifically for Magic: The Gathering players. With enough space to hold 60 sleeved cards, it keeps your deck safe, compact, and easy to carry. Featuring the iconic Magic: The Gathering logo,…
This 3D printed deck box holder is the perfect accessory for Magic: The Gathering fans. Designed with a sleek look and featuring the iconic MTG logo, it keeps your deck box stable and on display during play or storage. Lightweight yet…
This 3D printed deck box is designed for Magic: The Gathering players, holding up to 60 sleeved cards. Inspired by the Assassin’s Creed MTG extension, it features the iconic Assassin’s Creed logo, making it both practical and stylish.…
Recently purchased the Brimhart Board Game Table from Amazon and wanted to create my own accessories, starting with a basic land station for MTG draft nights and general deck building purposes. The Base plate prints fine without supports…
This box can hold up to 100 sleeved Magic the Gathering Cards and a bonus 20 un-sleeved cards. Just print and snap the box and the lid together!
This custom Magic: The Gathering play stand is designed to keep your game area organized and streamlined, holding all the essential zones in one place. It features clearly designated slots for your Library , Graveyard , and Exile ,…
Enjoy this light weight and small form factor chips holder for @YBlood MTG Counters / Chips. 5 slots that holds up to 12 chips each Lid with threads for snug and secure fit Ribbed lid for your pleasure (pictures are a previous version…
Made for Commander – Holds a full 100-card Commander deck in sleeves, plus room to separately hold tokens and displays commander in front no support needed time to pint 2h
Remix of another model, resized to fit in Fageverld organizer boxes. Two options, one full size, and one with a cutout.
A set of counters that can be mixed and matched to keep track of counters on cards. Snap together and rotate! These come in hand when you have different combination of counters that may be hard to keep track of.
This is an update to a previous model I made Magic the Gathering Deckbox 6-8 EDH/Commander Decks . The previous model was too large for most buildplates and required extra hardware to assemble. This new version, while holding only 6…
