20 Card Case for Magic: the Gathering Cards w/DragonShield sleeves
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
M:tG 20-card case w/a showcase front & logo debossed back, resized to support 20 DragonShield Matte sleeved cards.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 143
- Wydruki
- 0
- Wyświetlenia
- 672
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial
20-Card Case for M:tG JumpStart boosters, resized for DragonShield Matte Sleeves
This is a remix that used the parameterization Fusion 360 file to adjust the sleeves for DragonShield Matte sleeves, as the original box is slightly too short and just baaaaarely too thin. See screenshots – I confirmed that this fits very well (although snugly in terms of depth).
The following were my settings:
Infill: 15% Gyroid
Layer Height: 0.15mm (0.20mm first layer)
Seemed to work well although the slide is a tight fit (to start). The trick to getting the cards out is to kind of shake the box to the side.
Attribution
Thanks to brettvitaz for the original!