1 / 3
20 Card Case for Magic: the Gathering Cards w/DragonShield sleeves — image 1
1 / 3

20 Card Case for Magic: the Gathering Cards w/DragonShield sleeves

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

M:tG 20-card case w/a showcase front & logo debossed back, resized to support 20 DragonShield Matte sleeved cards.

Rating
0 / 5
Likes
14
Downloads
143
Makes
0
Views
672
Reviews
0

Updated at source:

Model information

Category
Board Games
License
Creative Commons — Attribution — Noncommercial

20-Card Case for M:tG JumpStart boosters, resized for DragonShield Matte Sleeves

This is a remix that used the parameterization Fusion 360 file to adjust the sleeves for DragonShield Matte sleeves, as the original box is slightly too short and just baaaaarely too thin. See screenshots – I confirmed that this fits very well (although snugly in terms of depth).

The following were my settings:

Infill: 15% Gyroid

Layer Height: 0.15mm (0.20mm first layer)

Seemed to work well although the slide is a tight fit (to start). The trick to getting the cards out is to kind of shake the box to the side.

Attribution

Thanks to brettvitaz for the original!

Tags